Horizontal Precision Filter also known as large capacity cartridge filter discards the PP meltblown cartridge used in traditional cartridge filters and uses a high-flow cartridge instead. One element of Horizontal Precision Filter can treat 50m3/h water or liquid. In terms of water flow, one 40"…
Read More
The axial-free spiral sand-water separator is suitable for grit tanks in sewage treatment plants, and is a device used to treat sand-water mixtures in sewage treatment. The sand-water separator equipment is generally installed at an angle of 20°-30°. The sand-water mixture enters the equipment from…
Read More
Linear Vibration Screen produced by JX Filtration has advantages of low energy consumption, high output, simple structure, easy maintenance, automatic discharge. Working principle Linear Vibration Screen is driven by double vibrating motor. When the two vibrating motors are rotated synchronously and counter-rotating, the exciting force…
Read More
The Vibratory Separator generally consists of a screen cover (usually provided with a feeding interface), a screen frame (built-in screen components, which are formed by coil welding), a driving device (usually a vertical vibration motor), and a vibration isolation device (a set of It is…
Read More
The Mechanical Bar Screen is assembled into a set of rotary grid chains by a unique rake tooth factory. Driven by the motor reducer, the rake tooth chain rotates against the direction of the water flow. When the rake tooth chain runs to the upper…
Read More
Contact us
Cartridge filter consists of two parts: filter housing and filter element. Mainly removes fine particles from water. The built-in filter element is made of PP melt-blown filter element, wire wound filter element, pleated filter element, absorbent cotton filter element, activated carbon filter element, etc. Loading…
Read More
The plate and frame sludge filter press is a pressure filtration equipment with intermittent operation, which is suitable for solid-liquid separation of various suspensions. The plate and frame filter press is a machine used in chemical dehydration earlier. Plate and frame filter presses are generally…
Read More
Horizontal Decanter Centrifuge is a horizontal screw discharge, continuous operation sedimentation equipment. This machine can continuously feed, separate, wash and unload at full speed. It has the characteristics of compact structure, continuous operation, stable operation, strong adaptability, large production capacity and convenient maintenance. This type…
Read More
The grid gap of the sieve bend screen is between 0.3-2mm, and the amount of water passing through is large, and the maximum balance between the amount of water passing and the amount of slag removal is achieved. Working principle The wastewater to be treated…
Read More
The Vibrating Sieve Machine is a high-precision fine powder screening machine with low noise and high efficiency. It takes 3-5 minutes to quickly change the screen. The rotary vibrating screen is made of a vertical motor as the excitation source. The upper and lower ends…
Read More
The Solid Liquid Separation has no energy cost by taking advantage of the gravity of water flow. Water yield dispose is large by single-motor. It is easy to clean without any obstruct during filtration. The Solid Liquid Separation is a unpowered small-scale separate equipment which…
Read More
Disk Stack Centrifuge is composed of inlet/outlet device, drum, vertical/horizontal shafts, housing, speed detector, brake, motor and etc. The material is discharged with centripetal pump after separation. With a high output pressure (0-0.5mpa), the material be directly delivered to the downstream equipment. Features Working principle When…
Read More
Dissolved Air Flotation is a widely-used solid-liquid separation equipment in wastewater treatment industry. It can effectively remove the suspensions, oils, and adhesives in the wastewater, one of the key equipment in the early processing. Working principle The dissolving air tank can produce dissolving gas which…
Read More
Pressure Arc Screen are used for separation of solids. Pressure Arc Screen is a solid-liquid separation equipment that relies on pressure to screen wet materials. It consists of a screen surface, a screen box, a feeding device and an outlet. The screen surface is the key…
Read More
Self cleaning. No moving parts. Low maintenance. Wide range of applications. Sieve Bend is a simple mechanical filter. The filter surface has a curved or slanted surface. The advantage of this shape is that the suspended solids, which are sieved from the water, will slide down…
Read More